Asbestos removal is a very sensitive undertaking, which requires high precautionary standards. The preparation phase is especially crucial in avoiding adverse health effects on workers and house occupants.
Here is a simple guideline a qualified specialist would follow in preparation for eliminating friable products (asbestos containing material in powder form), depending on information through the Australian Department of Education, Employment and Workplace Relations:
1. Preparation For Removal Project
Before you try to do just about anything, you must follow these preparatory procedures:
– You need to first ask for asbestos removal control plan (ARCP), plus the work instructions.
– So that the highest standards of safety and compliance with the project, an on-site assessment have to be performed. Relevant data can be sourced from a current asbestos register.
– It is necessary that calculations are constructed with the necessary volume of materials, based on the quality requirements, specifications and plans.
– Applicable environmental requirements ought to be identified so the project can adhere to all regulatory obligations.
– The healthiness of workers involved in the project must be preserved. Therefore, you should apply all processes necessary in meeting health surveillance requirements. This involves air monitoring.
– Authorization may then be obtained (determined by company and legislative requirements) after finishing the preparation phase.
– All workers active in the project needs to be provided with personal protective clothing (PPE) that is consistent with the job. Such equipment should be checked for faults beforehand.
2. Preparation Of Removal Area And
When the project has been authorized, following the initial preparation phase, another preparation of the particular website is necessary. This involves the following activities:
� The actual materials containing asbestos must be identified and the asbestos register checked.
� Having identified the mark materials, you can then implement signage and barricade procedures. This can be necessary in delineating work areas inside site; hence preventing unwarranted access by unqualified persons.
� Obviously, you should also create the decontamination unit prior to starting the job.
� In addition, you have to test the decontamination procedures, only to ensure their effectiveness, while ruling out likelihood of error.
� Similarly, all equipment and materials that’ll be used in elimination of asbestos containing material (ACM) should be checked before the operation.
� It’s critical that adjacent utilities are assessed beforehand. Such utilities as power lines and water pipes may require deactivation, containment or diversion. This will avert avoidable risks.
� The code of practice and applicable legislation would also need you to notify all occupants in the building, neighbors and any body else who could possibly be suffering from the operation.
3. Enclosing The Removal Site
Here is the last step involved in preparation for the removal project. Various activities involved include:
– You need to get the most appropriate enclosure type and removal process, for a way extensive the removal project is.
– Since friable items are potentially more harmful than non-friable products (ACM in solid form), stricter enclosure procedures will be required.
– Each particular enclosure type is selected, you must make sure that negative air pressure is maintained within it, in compliance with legislative requirements. It will even be inspected and smoke tested to make certain that it’s totally air-tight.
– After completing every one of these preparatory procedure, a licensed assessor needs to be notified from the proposed asbestos removal project.